纳米Fe3O4/高岭土复合粉体制备及其对亚甲基蓝吸附性能研究

以天然高岭土为载体、利用化学共沉淀法成功地制备出纳米Fe3O4/高岭土复合粉体。采用XRD、FSEM对复合粉体的物相组成、粒径、显微结构、形貌进行了表征,并研究了其磁分离性能和对亚甲基蓝(MB)的吸附性能。结果显示,复合粉体中的铁氧化物呈单一的Fe3O4相,Fe3O4晶粒的尺寸为10~30 nm,且均匀负载于高岭石晶体表面。当Fe3O4、高岭土质量比为1∶5时,复合粉体的磁分离率高达90.12%,并具有良好的吸附性能。复合粉体对MB的去除率随着吸附时间的延长、吸附温度的升高、溶液p H的增大和投入量的增加而逐步提高,随着MB溶液初始浓度的增大而逐步减小;对MB的吸附量随初始浓度的增大而逐步增大。     

Anti-bacterial effect of four extracts from leaves of Dracontomelon dao on Escherichia coli growth using microcalorimetry coupled with principal component analysis

The anti-Escherichia coli activities of four extracts in leaves of Dracontomelon dao, a traditional folk herb in China were investigated and compared by microcalorimetry. The four extracts are PE fraction, CHCl₃ fraction, EtOAc fraction, and n-BuOH fraction. The heat flow power–time (HFP–time) curves of E. coli growth in the presence of the four extracts were measured using an ampoule method. Then the nine thermal kinetic parameters were obtained from the curves. From the result of principal component analysis, it can be seen that parameters k ₁, k ₂, P ₁, and Q _p2 might be the main parameters in evaluating the anti-E. coli effects. In the presence of CHCl₃ fraction, EtOAc fraction, and n-BuOH fraction, k ₂, Q _p2 of E. coli decreased with increasing concentrations of the extracts. The EtOAc fraction was observed to have the strongest anti-bacterial activity with half-inhibitory concentration IC50 of 98.5 μg mL^?1. So, it can be concluded that EtOAc fraction can be further developed as anti-bacterial bioactive fraction of leaves of Dracontomelon dao.     

Miscibility and crystallization behaviors of stereocomplex-type poly(l- and d-lactide)/poly(methyl methacrylate) blends

Stereocomplex-poly(l- and d-lactide) (sc-PLA) and poly(methyl methacrylate) (PMMA) blends were prepared by solution blending at PMMA loadings from 20 to 80 mass%. The miscibility and crystallization behaviors of the blends have been studied in detail by differential scanning calorimeter. The single-glass transition temperatures (T _g) of the blends demonstrated that the obtained system was miscible in the amorphous state. It was observed that the crystallization peak temperature of sc-PLA/PMMA blends was marginally lower than that of neat sc-PLA at various cooling rates, indicating the dilution effect of PMMA on the sc-PLA component to restrain the overall crystallization process. In the study of isothermal crystallization kinetics, the reciprocal value of crystallization peak time ( \( t_{\text{p}}^{ - 1} \) ) decreased with increasing PMMA content, indicating that the addition of non-crystalline PMMA inhibited the isothermal crystallization of sc-PLA at an identical crystallization temperature (T _c). Moreover, the negative value of Flory–Huggins interaction parameter (χ ₁₂ = ?0.16) of the blend further indicated that sc-PLA and PMMA formed miscible blends.     

Dynamic analysis on metal selenide electrodeposition

Based on the basic principles of kinetics and some reasonable assumptions about the electrodeposition process, a dynamic model for metal selenide electrodeposition (kink site selected model) was constructed. This model is of universal significance in realizing the compositional prediction and dynamic behavior analysis of deposited films for different main salt concentration ratios and was applied to the ternary Cu–In–Se system. For CuInSe₂ electrodeposition, in the Cu–Se system, the co-deposition of Cu and Se can be carried out within a large range of main salt concentration ratio; in the Cu–In system, the mole fraction of Cu in deposited thin films is always higher than that of Cu²⁺ in electrolyte, while in the In–Se system, the co-deposition of In and Se can be achieved only when the In³⁺ concentration is much higher than the H₂SeO₃ concentration. As for the compositional estimation of CuInSe₂, the predictive results of our dynamic model agree well with the experimental data. It is then found that by correcting the difference of kink site selectivity constants caused by the change of deposition potential, the error of the predictive results can be reduced.     

Transition from π Radicals to σ Radicals: Substituent‐Tuned Cyclization of Hydrazonyl Radicals

Hydrazonyl radicals are known for their π‐electronic structures; however, their σ‐electronic structures have not been reported as yet. Herein, we show that readily accessible β,γ‐ and γ,δ‐unsaturated N‐trichloroacetyl and N‐trifluoroacetyl hydrazones can be conveniently converted into hydrazonyl σ radicals, which subsequently undergo 5‐exo‐trig radical cyclization at the N¹ or N² atom to form pyrazolines and azomethine imines, respectively.     

Magnetic Titanium Dioxide Nanocomposites for Surface‐Enhanced Resonance Raman Spectroscopic Determination and Degradation of Toxic Anilines and Phenols

Mesoporous M‐TiO₂ NCs, functionalized by PATP, can capture toxic anilines and phenols by azo coupling. Loading these nanodevices with Ag NPs offers the possibility for a sensitive quantitative determination of target compounds by SERRS spectroscopy, which allows multiplex detection because of the specific vibrational fingerprints. Sensitivity and selectivity can be further enhanced by concentrating the hybrid particles by an external magnet and compound‐specific binding (anilines versus phenols). The bound toxic compounds can be degraded by TiO₂‐assisted photocatalysis after removal of the loaded hybrid particles from the sample solution with an external magnet. The degradation process can be enhanced in the presence of plasmonic Ag nanostructures.     

Highly Enantioselective Ring‐Opening Reactions of Aziridines with Indole and Its Application in the Building of C3‐Halogenated Pyrroloindolines

A magnesium‐catalyzed asymmetric ring‐opening reaction of aziridine with indole has been realized by employing commercially available chiral ligands. Both of the enantiomers of the ring‐opening product could be obtained with good yields and a high level of enantioselectivity. The corresponding ring‐opening product could be further transformed to various types of enantioenriched C₃‐halogenated‐pyrroloindolines.     

A Multifunctional Photoswitch: 6π Electrocyclization versus ESIPT and Metalation

A terthiazole‐based molecular switch associating 6π electrocyclization, excited state intramolecular proton transfer (ESIPT), and strong metal binding capability was prepared. The photochemical and photophysical properties of this molecule and of the corresponding nickel and copper complexes were thoroughly investigated by steady‐state and ultrafast absorption spectroscopy and rationalized by DFT/TDDFT calculations. The switch behaves as a biphotochrome with time‐dependent photochemical outcome and displays efficient ESIPT‐based fluorescence photoswitching. Both photochemical reactions are suppressed by nickel or copper metalation, and the main factors contributing to the quenching of the electrocyclization are discussed.